HotRodCarbs.com
HotRodCarbs.com

Carburetor Spacer Heat Insulator

"the carburetor insulating spacers and shields that we got from you work great!.. Since putting them on, we've had no more fuel percolation problems at all."... "Thank You for giving us this peace of mind when driving our car!" - Robert H.

 

Protect Your Investment!

 

hot rod carburetor spacerOur Carburetor Insulating Spacers & Bowl Shields are made of an Aero-Space Engineered Material that will minimize the Engine to Carburetor thermal transfer “Heat Soak” and the Negative Effects caused by the lower boiling point temperatures of today's gasoline blends... and believe us, it is not just the ethanols in most fuels today that are causing these problems.

 

Each of our Carb Spacers & Bowl Shields has been designed to be used Individually or in stacked "Paired Units" for even greater insulating properties. *While these 1/4" insulators works great, If your hood clearance will allow, we do recommend that each carburetor use a 1/2" Thick "Paired Unit". It's the same principle as using more insulation in your homes attick, Not Less. **click on this photo for larger image of 1/2" Paired Units installed.

 

• Each Carburetor Insulator comes with carburetor mounting studs, nuts, washers & gaskets

 

• The Autolite 2100 - Motorcraft 2150 2bbl. is in the works. Please check back here or call us for availibilty.

 

• Don't like the HotRodCarbs.com logo showing, don't worry, just flip the parts over.

 

  • Proprietary Patented Composite
  • Material Will Not Melt - Crush or Deform
  • Black O.E.M. Appearance
  • True Thermal Break Between Engine Heat and Carburetors 
  • Hard Ridgid Material that is "Tough As Nails"

 

PARTS ORDERS by phone are Welcome... Please call with your needs

 

there is a $25.oo minimum on all parts orders + usps priority mail or ups ground shipping

 

Sort by

Small Base Rochester 2-Jet - Carb Spacer - 1/4” Thick Heat Insulating

Small Base Rochester 2-Jet - Carb Spacer - 1/4” Thick Heat Insulating

$29.95

SMALL BASE PLATE - ROCHESTER 2-JET - Carb Insulating Spacer (see avail. thicknesses & costs below) • ALL Primary D-Shape Base Plates = Chevrolet 265" - 283" - 307" and Other Buick - Olds - Pontiac - GMC &…

Small Base Rochester 2-Jet - Bowl Shield - 1/4” Thick Heat Insulating

Small Base Rochester 2-Jet - Bowl Shield - 1/4” Thick Heat Insulating

$39.95

SMALL BASE PLATE - ROCHESTER 2-JET - Carb Insulating Bowl Shield (deflects the radiant engine heat away from under the carb bowl it's self)  • ALL Primary D-Shape Base Plates = Chevrolet 265" - 283" - 307…

Small Base Rochester 2-Jet - Paired Unit - 1/2” Thick Heat Insulating

Small Base Rochester 2-Jet - Paired Unit - 1/2” Thick Heat Insulating

$59.00

$AVE - SMALL BASE PLATE - ROCHESTER 2-JET - 1/2" THICK CARBURETOR INSULATORS - 1 spacer with 1 bowl shield = Paired Unit If you have the hood clearance, we recommend using these! • ALL Primary D-Shape Base …

Large Base Rochester 2-Jet - Carb Spacer - 1/4” Thick Heat Insulating

Large Base Rochester 2-Jet - Carb Spacer - 1/4” Thick Heat Insulating

$34.95

LARGE BASE PLATE - ROCHESTER 2-JET - Carb Insulating Spacer (see avail. thicknesses & costs below) • Fits ALL Large Base - Primary & Secondary Carburetor Base Plates; including • Chevrolet - Buick - Ol…

Large Base Rochester 2-Jet - Bowl Shield - 1/4” Thick Heat Insulating

Large Base Rochester 2-Jet - Bowl Shield - 1/4” Thick Heat Insulating

$44.95

LARGE BASE PLATE - ROCHESTER 2-JET - Carb Insulating Bowl Shield (deflects the radiant engine heat away from under the carb bowl it's self) • Fits ALL Large Base - Primary & Secondary Carburetor Base Plates; in…

Large Base Rochester 2-Jet - Paired Unit - 1/2” Thick Heat Insulating

Large Base Rochester 2-Jet - Paired Unit - 1/2” Thick Heat Insulating

$69.00

$AVE - LARGE BASE PLATE - ROCHESTER 2-JET - 1/2" THICK CARBURETOR INSULATORS - 1 spacer with 1 shield = Paired Unit  If you have the hood clearance, we recommend using these! • Fits ALL Large Base…

Vintage-94 - 3-Bolt - Carb Spacer - 1/4” Thick Heat Insulating

Vintage-94 - 3-Bolt - Carb Spacer - 1/4” Thick Heat Insulating

$24.95

VINTAGE 94 - 3-BOLT CARBURETORS - Carb Insulating Spacer (see available thickness & costs below) • Holley / Ford 94 - 2100 - 2110 • Edelbrock 94 (Cheaper than Edelbrock p/n 8751) • Stromberg 48 and 40 &…

Vintage-94 - 3-Bolt - Bowl Shield - 1/4” Thick Heat Insulating

Vintage-94 - 3-Bolt - Bowl Shield - 1/4” Thick Heat Insulating

$34.95

VINTAGE 94 - 3-BOLT CARBURETORS - Carb Insulating Bowl Shields (deflects the radiant engine heat away from under the carb bowl it's self) • Holley / Ford 94 - 2100 - 2110 • Edelbrock 94 ( Edelbrock 8751 ) &…

Vintage-94 - 3-Bolt - Paired Unit - 1/2” Thick Heat Insulating

Vintage-94 - 3-Bolt - Paired Unit - 1/2” Thick Heat Insulating

$49.00

$AVE - VINTAGE 94 - 3-BOLT CARBURETORS - 1/2" THICK CARBURETOR INSULATORS - 1 spacer with 1 shield = Paired Unit  If you have the hood clearance, we recommend using these! • Holley / Ford 94 - 210…

Stromberg-97 - 3-Bolt - Carb Spacer - 1/4” Thick Heat Insulating

Stromberg-97 - 3-Bolt - Carb Spacer - 1/4” Thick Heat Insulating

$24.95

STROMBERG 97 - 3-BOLT CARBS - Carb Insulating Spacer (see available thickness & costs below) • Stromberg 81 - 97 - 48 • Stromberg BIG97 • Speedway 9 Super 7 • Demon 98 • each…

Stromberg-97 - 3-Bolt - Bowl Shield - 1/4” Thick Heat Insulating

Stromberg-97 - 3-Bolt - Bowl Shield - 1/4” Thick Heat Insulating

$34.95

STROMBER 97 - 3-BOLT CARBS - Carb Insulating Bowl Shields (deflects the radiant engine heat away from under the carb bowl it's self) • Stromberg 81 - 97 - 48 • Stromberg BIG97 • Spe…

Stromberg-97 - 3-Bolt - Paired Unit - 1/2” Thick Heat Insulating

Stromberg-97 - 3-Bolt - Paired Unit - 1/2” Thick Heat Insulating

$49.00

$AVE - STROMBERG-97 3-BOLT CARBURETORS - 1/2" THICK CARBURETOR INSULATORS - 1 spacer with 1 shield = Paired Unit  If you have the hood clearance, we recommend using these! • Stromberg 81 - 97…

Holley 2300 - Carb Spacer - 1/4” Thick Heat Insulating

Holley 2300 - Carb Spacer - 1/4” Thick Heat Insulating

$34.95

HOLLEY 2300 Insulating Carb Spacers (see available thickness & costs below) • Fits ALL Common Primary Base Plates and • True Tri-Power Base Plates - including - CHEVROLET CORVETTE TRI-POWER ** - MOPAR …

Holley 2300 - Bowl Shield - 1/4” Thick Heat Insulating

Holley 2300 - Bowl Shield - 1/4” Thick Heat Insulating

$44.95

HOLLEY 2300 - Carb Insulating Bowl Shields deflect the radiant heat from engine away from under the carb bowl it's self • Fits ALL Common Primary Base Plates and • True Tri-Power Base Plates - including - CHEVRO…

Holley 2300 - Paired Unit - 1/2” Thick Heat Insulating

Holley 2300 - Paired Unit - 1/2” Thick Heat Insulating

$69.00

$AVE - HOLLEY 2300 - 1/2" THICK CARBURETOR INSULATORS - 1 spacer with 1 shield = Paired Unit  If you have the hood clearance, we recommend using these! • Fits ALL Common Primary Base Plates and&nb…

Carburetor Studs - Bright Zinc - Correct Length for Individual or Paired Spacers & Shields

Carburetor Studs - Bright Zinc - Correct Length for Individual or Paired Spacers & Shields

$6.99

• These come with, and are included in the price of each Carburetor Insulator • stud lengths are carburetor make and model specific - Sets of 3 each @ $6.99 - Sets of 4 each @ $8.99 …

Sort by

 

Mobile Site

eCommerce Software by CubeCart